A shelf where you already have two screws.
It replaces the plate on your light switch and puts a real shelf and a row of key hooks in the dead space beside your door. No anchors, no drilling, no studs to find — it mounts on the two screws already in the wall.
One part, printed solid, no hardware to buy.
The switch plate, the shelf, the rim and the key hooks are a single printed piece. There is nothing to assemble and nothing to glue. It uses the two screws that came with your switch.
The plate is cut to the oversized wall plate footprint, so it covers the paint line and the drywall edge the old plate left behind. The rim around three sides keeps keys and coins from sliding off the front.
Printed in white PETG — a tougher, less brittle plastic than the PLA most printed parts use, and it does not soften in a sunny entryway.
- Overall width
- 4.75 in
- Projects from wall
- 5.12 in
- Plate height
- 4.88 in
- Key hooks
- 3
- Weight
- 3.1 oz
- Material
- White PETG
- Fits
- Standard toggle switch
- Mounting
- Existing switch screws
-
Kill the breaker
Switch off the circuit at the panel before the old plate comes off. The switch body is never touched, but the screws sit next to live terminals.
-
Take off the old plate
Back out the two screws and set the old plate aside. Keep the screws — the shelf reuses them.
-
Screw the shelf on
The screw slots have a little travel in them, so the plate can be squared up before the screws come down tight. Snug, not forced.
One switch through six, same shelf.
Count the toggles on your existing plate and order that size. The shelf gets deeper and picks up more key hooks as it gets wider.
| Size | Width | Projects | Height | Hooks | Weight | Price |
|---|---|---|---|---|---|---|
| Single switch | 4.75 in | 5.12 in | 4.88 in | 3 | 3.1 oz | $18.50 |
| Double | 6.56 in | 5.62 in | 4.88 in | 5 | 4.7 oz | $25.50 |
| Triple | 8.37 in | 5.62 in | 4.88 in | 5 | 6.0 oz | Made to order |
| Four-gang | 10.19 in | 6.12 in | 4.88 in | 6 | 7.8 oz | Made to order |
| Five-gang | 12.00 in | 6.12 in | 4.88 in | 7 | 9.3 oz | Made to order |
| Six-gang | 13.39 in | 6.12 in | 4.88 in | 8 | 10.5 oz | Made to order |
Drawn, printed and packed in Farmington, Utah.
ODin is a one-person shop. Every part is drawn here from scratch, printed here, and boxed here — nothing is a downloaded file and nothing is drop-shipped.
The shelf went through six revisions and a loaded fit test on a real wall before it earned a price. When something does not hold up, it gets redrawn rather than shipped.
The Etsy storefront opens shortly. Until then, orders and questions go straight to email and ship from Utah.
ODin is a trade name of Olson Distribution LLC, a Utah limited liability company. Wholesale and bulk inquiries are welcome at olsondistribution.com.